Nissan UD PE6 Cylinder Liner 11012-96501

11012-96501 Cylinder Liner for Nissan UD PE6 Engine

The 11012-96501 cylinder liner is used for Nissan UD PE6 and PE6T diesel engine repair. It is suitable for engine overhaul work when the old liner is worn, scored, cracked, polished, or no longer able to maintain stable compression.

This page focuses on 11012-96501 as the main cylinder liner part number. The reference number 11012-96500 can be used as a Ref Cross for PE6 cylinder liner checking, but final confirmation should still be based on the old liner marking, engine model and measured dimensions.

Part Number and Engine Application

The main part number is 11012-96501. This cylinder liner is prepared for Nissan UD PE6 and PE6T engine applications. It may also be searched without hyphen as 1101296501, but this page should keep 11012-96501 as the main standard part number format.

Nissan UD PE6 engines can be used in different truck, bus and machinery repair applications. For this reason, the engine model alone should not be used as the only confirmation method. The removed liner sample and measured dimensions should be checked before shipment.

Key Checking Points Before Order

• Old cylinder liner part number or visible marking

• Engine model: Nissan UD PE6 or PE6T

• Required quantity: 6 pieces for one 6-cylinder overhaul set

• Bore size, outer diameter and total liner height

• Flange thickness and liner shoulder structure

• Photos of the old liner and engine nameplate

Cylinder Liner Replacement Notes

When replacing the cylinder liner, the piston, piston rings, liner seals, connecting rod bearings and gasket set should also be inspected. If the old liner has deep scoring, cavitation, overheating marks or uneven wear, the cause of failure should be checked before installing the new liner set.

Before assembly, clean the engine block seating area and check the liner fit carefully. Liner protrusion, bore clearance, sealing condition and cooling system condition should be checked according to the repair requirement. Poor installation or unresolved overheating problems can shorten the service life of the replacement liner.

Recommended Information for Quotation

To quote the correct 11012-96501 cylinder liner, please provide the old liner number, engine model, engine serial number, required quantity, photos of the removed liner and destination country. If you also need pistons, piston rings or a gasket kit for the same Nissan UD PE6 engine overhaul, please send the complete parts list together.

FAQ

Is 11012-96501 used for Nissan UD PE6 engines?

Yes. 11012-96501 is used as a cylinder liner reference for Nissan UD PE6 engine repair. It can also be checked for PE6T applications, but final confirmation should be made by old liner number and measured dimensions.

Is 11012-96500 the same liner reference?

11012-96500 can be used as a Ref Cross for checking this Nissan UD PE6 cylinder liner application. Before ordering, the old sample and size should still be verified.

Is the MOQ one piece or six pieces?

For this engine cylinder liner, MOQ is 6 pieces. This is more suitable for one complete 6-cylinder engine overhaul than selling one single liner separately.

Can this liner be confirmed only by engine model?

No. Engine model can only be used as an initial reference. The correct liner should be confirmed by old liner marking, bore size, outer diameter, liner height and sample photos.

What information should I send before ordering?

Please send the old liner number, engine nameplate, liner photos, measured size, required quantity and shipping destination. This helps confirm the correct cylinder liner before quotation.