Engine Control Wiring Harness 6745-81-9230 6745-81-9231 for Komatsu SAA6D114E Engine PC300-8 PC350-8 Excavator

Common Symptoms That May Require Harness Inspection

Intermittent engine fault codes: warning codes appear during vibration, heat or machine movement.

Sensor signal problems: pressure, temperature, speed or position signals become unstable or missing.

Control response issues: engine control or machine control functions respond intermittently.

Connector damage: loose pins, broken locks, corrosion, water ingress or oil contamination at the plug.

Wiring insulation damage: wires become cracked, hardened, cut or rubbed through near the engine harness routing area.

No power or unstable signal: open circuit, short circuit or poor ground may stop related engine-control circuits from working correctly.

Fitment Check Before Ordering

Before ordering this 6745-81-9230 / 6745-81-9231 Komatsu engine control harness, compare it with your original harness. Important confirmation points include the harness label, connector quantity, connector shape, pin count, branch layout, cable length and routing position.

For faster confirmation, please send clear photos of the original harness label, each connector, full harness routing, damaged area and machine model plate. This helps reduce wrong orders and confirms whether the harness matches your Komatsu SAA6D114E engine configuration.

Installation and Maintenance Notes

Disconnect machine power before removing or installing the engine control wiring harness.

Do not pull directly on the wires. Release connector locks before unplugging.

Inspect all connectors for bent pins, corrosion, water ingress and loose terminals.

Route the harness away from hot exhaust areas, sharp edges, moving parts and pinch points.

After installation, check engine start-up, sensor signals, monitor warnings, fault codes and operating stability before returning the machine to work.

Ordering Information

Topvelsun supplies wiring harnesses, cable sets, sensors, controllers, monitor panels and electrical components for Komatsu, Caterpillar, Hitachi, Hyundai, Kobelco, Volvo and other heavy equipment brands. For this 6745-81-9230 / 6745-81-9231 engine control harness, please provide your machine model, serial number, original part number and connector photos before quotation.

FAQ

What is 6745-81-9230 / 6745-81-9231 used for?

6745-81-9230 / 6745-81-9231 is listed as an engine control wiring harness reference for Komatsu SAA6D114E engine-related excavator applications. Final fitment should be verified by the original harness label and connector layout.

Can this harness be confirmed by machine model only?

No. Engine control wiring harnesses may vary by machine serial number, engine arrangement, controller version, connector layout and harness routing. Photos of the original harness are recommended before ordering.

Are there confirmed cross reference numbers for 6745-81-9230 / 6745-81-9231?

No additional cross reference has been confirmed from public sources. Use 6745-81-9230 / 6745-81-9231 as the primary references and verify by the original harness label or parts catalog.

What photos should I send for confirmation?

Please send photos of the original harness label, all connectors, pin layout, full harness routing, damaged area and machine model plate.