YN35V00005F1 Travel Speed Change-Over Valve for Kobelco SK100, SK120 and SK200

YN35V00005F1 Solenoid Valve Overview

The YN35V00005F1 is a 24V electric pilot solenoid valve identified by the valve model KWE5K-20/G24D12A. It is used in the solenoid valve manifold of selected Kobelco SK100, SK120 and SK200 series excavators. In the relevant hydraulic circuit configuration, the valve supports travel speed change-over between low- and high-speed travel modes.

Valve Function and Identification

When electrically activated, this directional pilot valve switches pilot oil flow within the solenoid manifold. The same YN35V00005F1 valve may be installed in different manifold positions depending on the machine configuration, so it should be identified by the original part number, KWE5K-20/G24D12A marking, voltage and connector rather than by function name alone.

Fitment Checks Before Installation

Before ordering, compare the YN35V00005F1 part number, KWE5K-20/G24D12A valve marking, 24V electrical specification, connector shape and valve body configuration with the existing unit. The machine model and serial number should also be provided when the original marking is incomplete.

FAQ

Is the YN35V00005F1 solenoid valve rated for 24V?

Yes. This page refers to the 24V KWE5K-20/G24D12A valve configuration. Confirm the voltage and complete marking on the old valve before replacement.

How can I confirm whether this valve fits my excavator?

Send the machine model, serial number, original YN35V00005F1 marking and clear photos of the old valve, connector and valve body. Machine model alone is not sufficient for final identification.

Can YN35V00005F1 be installed in more than one solenoid manifold position?

Yes. Parts catalog information shows this valve in several pilot-control positions, including the travel speed change-over circuit. The required position depends on the excavator configuration and solenoid manifold arrangement.

What is the warranty for this solenoid valve?

The standard warranty is 6 months. The part number, voltage, connector and installation position must be confirmed before installation.