Hino J05E / J08E Cylinder Liner S1146-73210

S1146-73210 Cylinder Liner for Hino J05E J08E Engine

The S1146-73210 cylinder liner is used for Hino J05E and J08E diesel engine repair. It is suitable for engine overhaul work when the old liner is worn, scored, polished, damaged by overheating, or no longer able to maintain stable compression.

This page focuses on S1146-73210 as the main cylinder liner part number. The reference number 11467-3200 can be used as a cross-checking number, but final confirmation should still be based on the old liner marking, engine model, bore size and liner dimensions.

Part Number and Engine Application

The main part number is S1146-73210. This cylinder liner is prepared for Hino J05E and J08E engine applications. In some supplier references, 11467-3200 may also be used for checking the same liner application.

Hino J05E and J08E engines can be used in different excavator and machinery applications. For this reason, the engine model, old liner sample and measured dimensions should be checked together before shipment.

Key Checking Points Before Order

Old cylinder liner part number or visible marking

Engine model: Hino J05E or Hino J08E

Required quantity: 6 pieces for one 6-cylinder overhaul set

Bore size, outer diameter and total liner height

Flange thickness and liner shoulder structure

Photos of the old liner and engine nameplate

Cylinder Liner Replacement Notes

When replacing the cylinder liner, the piston, piston rings, liner seals, connecting rod bearings and gasket set should also be inspected. If the old liner has deep scoring, cavitation, uneven wear or heat damage, the cause of failure should be checked before installing the new liner set.

Before assembly, clean the engine block seating area and check the liner fit carefully. Liner protrusion, bore clearance, sealing condition and cooling system condition should be checked according to the repair requirement. Poor installation or unresolved overheating problems can shorten the service life of the replacement liner.

Recommended Information for Quotation

To quote the correct S1146-73210 cylinder liner, please provide the old liner number, engine model, engine serial number, required quantity, photos of the removed liner and destination country. If you also need pistons, piston rings or a gasket kit for the same Hino engine overhaul, please send the complete parts list together.

FAQ

Is S1146-73210 used for Hino J05E and J08E engines?

Yes. S1146-73210 is used as a cylinder liner reference for Hino J05E and J08E engine repair. Final confirmation should be made by checking the old liner number, engine model and measured dimensions.

Is 11467-3200 the same liner reference?

11467-3200 can be used as a Ref Cross for checking this Hino J05E / J08E cylinder liner application. Before ordering, the old sample and size should still be verified.

Is the MOQ one piece or six pieces?

For this engine cylinder liner, MOQ is 6 pieces. This is more suitable for complete engine overhaul work than selling one single liner separately.

Can this liner be confirmed only by machine model?

No. Machine model can only be used as an initial reference. The correct liner should be confirmed by engine model, old liner marking, bore size and liner dimensions.

What information should I send before ordering?

Please send the old liner number, engine nameplate, liner photos, measured size, required quantity and shipping destination. This helps confirm the correct cylinder liner before quotation.