ME041105 Cylinder Liner Sleeve for Mitsubishi D6BR 6D16T Engine

ME041105 Cylinder Liner for Mitsubishi 6D16T Engine

The ME041105 cylinder liner is used for Mitsubishi 6D16T and D6BR diesel engine overhaul applications. It is also searched as a cylinder sleeve, engine liner or liner sleeve for Mitsubishi engine repair.

This page focuses on ME041105 as the main part number. Before ordering, the removed liner should be checked by part number, bore size, outer diameter, total length, flange shape, finish type and engine serial number.

ME041105 Product Information

Dimension and Fitment Check

Public references commonly associate ME041105 with Mitsubishi 6D16 and 6D16T cylinder liner applications. Some listings show bore and length references, but dimensions may vary by measuring method, finish type and supplier catalog.

For accurate confirmation, measure the removed liner and compare the bore diameter, outer diameter, total length, flange thickness, lower sealing area and surface finish. Do not select the liner by engine model alone when the engine has been rebuilt or modified before.

Common Reasons for Cylinder Liner Replacement

Cylinder wall wear: long service time may increase liner wear and reduce sealing performance.

Low compression: worn liner, piston rings or piston damage may reduce engine compression.

Overheating damage: high coolant temperature may cause liner distortion or sealing failure.

Coolant leakage: liner sealing area, O-rings or block condition should be checked during overhaul.

Engine overhaul: liners are often replaced together with pistons, rings, bearings and gaskets during a full rebuild.

Troubleshooting Before Replacement

Confirm whether the old liner part number matches ME041105.

Check the Mitsubishi engine model and engine serial number.

Measure bore diameter, outer diameter, total height and flange structure.

Inspect the cylinder block seat, liner protrusion area and coolant sealing area.

Check whether the failure was caused by overheating, poor lubrication, coolant cavitation, dirt entry or incorrect assembly.

Installation and Maintenance Notes

Clean the cylinder block liner seat before installation.

Check liner protrusion and sealing surface according to the engine repair procedure.

Inspect pistons, piston rings, connecting rod bearings and gaskets during overhaul.

Use correct coolant and maintain the cooling system to reduce cavitation and overheating risk.

Avoid mixing liners with different dimensions or finish types in the same engine rebuild.

After assembly, check coolant leakage, oil condition, compression and engine operating temperature.

FAQ

Q: What is ME041105?

ME041105 is a cylinder liner or cylinder sleeve reference for Mitsubishi 6D16T and D6BR diesel engine repair applications.

Q: Is ME041105 used for Mitsubishi 6D16T?

Yes. ME041105 is commonly listed for Mitsubishi 6D16 and 6D16T cylinder liner applications. Final fitment should still be checked by the old liner and engine information.

Q: Should cylinder liners be replaced as one piece or a set?

For a six-cylinder engine overhaul, liners are often replaced as a full set to keep wear and sealing conditions consistent. Single-piece replacement should be confirmed by repair condition and stock policy.

Q: What dimensions should be checked before ordering?

Check bore diameter, outer diameter, total length, flange shape, flange thickness, finish type and liner protrusion requirement. Measuring the removed liner is the safest method.

Q: Can Topvelsun help verify ME041105 before shipment?

Yes. Buyers can send old liner photos, engine nameplate, engine serial number and measurement photos. Topvelsun can help compare the visible details before order confirmation.