LG22E00003F2 LG22E00003F5 EL·C-OM Controller for Kobelco Excavator SK200-5 SK200LC-5 SK210-5 SK220-5

Common Symptoms That May Require Controller Inspection

Intermittent machine faults: warning messages or operating issues appear during vibration, heat or machine movement.

Hydraulic response problems: boom, arm, bucket, swing or travel functions respond slowly, incorrectly or intermittently.

Mode control issues: work modes, travel speed or control settings may not respond as expected.

Communication faults: monitor display or controller communication may become unstable when the controller, harness or connector has an issue.

No power or unstable signal: fuse, power supply, ground or wiring harness faults can imitate controller failure.

Fitment Check Before Ordering

Before ordering this Kobelco LG22E00003F2 / LG22E00003F5 EL-COM controller, compare it with your original controller. Important confirmation points include the controller label, part number, connector quantity, connector shape, pin layout, mounting position and software version.

For faster confirmation, please send clear photos of the original controller label, front housing, rear connector side, plug layout and machine model plate. This helps reduce wrong orders and confirms whether the controller matches your Kobelco SK-5 series excavator configuration.

Installation and Maintenance Notes

Disconnect machine power before removing or installing the EL-COM controller.

Do not pull directly on the wiring harness. Release connector locks before unplugging.

Inspect all connectors for bent pins, corrosion, water ingress and loose terminals.

Check fuse, power supply, ground and harness continuity before replacing the controller.

After installation, check monitor display, machine start-up, work mode response, hydraulic operation and fault-code status before returning the machine to work.

Ordering Information

Topvelsun supplies controllers, ECUs, MCUs, EL-COM controllers, monitor panels, sensors, wiring harnesses and electrical components for Kobelco, Caterpillar, Komatsu, Hitachi, Hyundai, Volvo, Doosan and other heavy equipment brands. For this LG22E00003F2 / LG22E00003F5 controller, please provide your machine model, serial number, original part number and connector photos before quotation.

FAQ

What is LG22E00003F2 / LG22E00003F5 used for?

LG22E00003F2 / LG22E00003F5 is listed as an EL-COM controller reference for Kobelco excavator electronic control system applications. Final fitment should be verified by the original controller label and connector layout.

Can this controller be confirmed by machine model only?

No. EL-COM controller units may vary by machine serial number, software version, connector layout and electrical configuration. Photos of the original controller are recommended before ordering.

Are LG22E00003F2 and LG22E00003F5 interchangeable?

Do not assume interchangeability by part number series alone. Please verify the original controller label, connector layout, software version and machine serial number before selecting a replacement.

What photos should I send for confirmation?

Please send photos of the original controller label, front and rear housing, all connectors, pin layout, mounting position and machine model plate.