EX200-5 Turbo 114400-3320 Turbocharger Fit for Isuzu 6BG1T Engine

114400-3320 Turbocharger for Isuzu 6BG1T | Fits Hitachi EX200-5

If your excavator is losing power, smoking, or showing turbo oil leakage, a worn turbocharger may be the cause. This 114400-3320 turbocharger is an aftermarket replacement designed for Isuzu 6BG1T diesel engines and is commonly applied on Hitachi EX200-5 and related models. It helps restore boost pressure, improve throttle response, and reduce abnormal noise caused by turbo shaft play.

Fitment note: Turbo part numbers may vary by engine configuration and catalog. Please send a photo of your old turbo nameplate to confirm compatibility before ordering.

Before Replacement: Quick Inspection Checklist

Replacing the turbo without fixing root causes can lead to repeat failure. Please check:

1. Air filter, intake hose cracks, loose clamps (boost leak)

2. Oil feed line and oil return line (blockage or carbon)

3. Intercooler and charge pipes (oil pooling)

4. Exhaust restrictions (collapsed muffler / blocked pipe)

5. Engine crankcase ventilation (excessive blow-by)

Installation Notes (Very Important for Turbo Life)

• Pre-lube: Fill the turbo with clean engine oil before first start

• Oil & filter: Replace engine oil and oil filter during turbo replacement

• Prime oil system: Crank engine briefly to build oil pressure (per your mechanic’s procedure)

• Idle warm-up: Let engine idle 3–5 minutes after installation before load

• Cool-down habit: Idle 1–2 minutes before shutdown after heavy work

FAQ

Q1: Is 114400-3320 an OEM turbocharger?

A: This is an aftermarket replacement. OEM numbers are used for identification and fitment reference only.

Q2: What if my catalog shows VA720015 instead of 114400-3320?

A: VA720015 is commonly used as a cross reference. Please confirm by turbo nameplate and photos to avoid mismatch.

Q3: Does it fit all EX200-5 machines?

A: EX200-5 may have different engine/turbo configurations by year and region. Fitment must be confirmed by nameplate.

Q4: Do I need to change oil lines when replacing the turbo?

A: Strongly recommended to clean/replace oil feed and return lines to prevent oil starvation and repeat turbo failure.

Q5: What is the warranty?

A: 6 months warranty for manufacturing defects under normal use.

Q6: What is the lead time and shipping method?

A: Usually 7–30 working days depending on stock. Shipping via express (DHL/FedEx/UPS), air, or sea.

Q7: Can you help confirm the part before I pay?

A: Yes. Send machine/engine info and turbo nameplate photo for confirmation.

Q8: What information should I provide for a fast quotation?

A: Quantity, shipping country/city, and photos of nameplate + old turbo.